MPC875ZT133
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 256-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC875 |
| JESD-30 Code | S-PBGA-B256 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 133MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (1), 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM, Security; SEC |
| Security Features | Cryptography |
| Height Seated (Max) | 2.54mm |
| Length | 23mm |
| RoHS Status | Non-RoHS Compliant |
MPC875ZT133 Overview
The embedded microprocessor ships overseas conveniently packed in 256-BBGA. The packaging method Tray provides high reliability. Cores/Bus width of the CPU is 1 Core 32-Bit . Understand how the operating temperature around 0°C~95°C TA is determined. In the series MPC8xx, it is found. It has DRAM RAM controllers. The microprocessor features interfaces HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART for better service. At 3.3V, the CPU runs its I/O. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. You can search for variants of a microprocessor with MPC875. In total, 256 terminations have been made. Using a 1.8V voltage supply, you should be able to operate the cpu microprocessor. 32-Bit is its architecture. A maximum supply current of 1.9V can be achieved by the microprocessor. As a Microprocessors, this cpu microprocessor is typical. 32 is the width of the external data bus on this CPU. This CPU microprocessor requires 1.83.3V power supplies according to the datasheet.
MPC875ZT133 Features
32-Bit Structure
MPC875ZT133 Applications
There are a lot of NXP USA Inc. MPC875ZT133 Microprocessor applications.
- Fabric
- DVD\DV\MP3 players
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Virtual reality VR robots
- Printers
- Entertainment products
- Electrocardiogram (EKG)
- 3D printers
- Switches
- Tape drives
