MPC875ZT66
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 256-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | MPC8xx |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC875 |
| JESD-30 Code | S-PBGA-B256 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 66MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (1), 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM, Security; SEC |
| Security Features | Cryptography |
| Height Seated (Max) | 2.54mm |
| Length | 23mm |
| RoHS Status | Non-RoHS Compliant |
MPC875ZT66 Overview
With a packing size of 256-BBGA, this embedded microprocessor is ideal for international shipping. High reliability is provided by the advanced packaging method Tray. There are 1 Core 32-Bit cores per bus width on the CPU. Identify the operating temperature around 0°C~95°C TA. MPC8xx is its series number. A CPU with this architecture uses DRAM RAM controllers. The microprocessor features interfaces HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART for better service. This CPU runs I/O at 3.3V. There is MICROPROCESSOR, RISC MICROPROCESSOR, RISC in the uPs, uCs, or peripheral ICs categories. To find variants of the microprocessor, try searching with MPC875. Total terminations are 256. When the voltage supply is 1.8V, the cpu microprocessor should be powered on and run. The architecture of the microprocessor is 32-bit. A maximum supply current of 1.9V can be achieved by the microprocessor. As a typical Microprocessors, this cpu microprocessor has Microprocessors display. The external data bus width of this CPU is 32. This CPU microprocessor requires 1.83.3V power supplies according to the datasheet.
MPC875ZT66 Features
32-Bit Structure
MPC875ZT66 Applications
There are a lot of NXP USA Inc. MPC875ZT66 Microprocessor applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Washing machine
- Information appliances (networking of household appliances)
- Volt meter
- Industrial robot
- Firewalls
- Broadband technology, video and voice processing
- Magnetic resonance imaging (MRI)
- Binding machines
- Instrument control
