MPC885CVR66
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MPC885 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 66MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (3), 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM, Security; SEC |
| Security Features | Cryptography |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | ROHS3 Compliant |
MPC885CVR66 Overview
The embedded microprocessor ships overseas conveniently packed in 357-BBGA. High reliability is achieved by using advanced packaging methods Tray. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Identify the operating temperature around -40°C~100°C TA. The MPC8xx series contains it. There are DRAM RAM controllers on this CPU. The microprocessor features interfaces HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART for better service. The CPU runs at 3.3V when it comes to I/O. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. The microprocessor can be searched for with MPC885 if you are looking for variants. Overall, there are 357 terminations. Using a 1.8V voltage supply, the microprocessor should turn on and run. There are 32 bits in its architecture. The supply voltage should not exceed 1.9V. The cpu microprocessor Microprocessors is typical. 32 is the width of the external data bus on this CPU. In the datasheet, 1.83.3V power supplies are required for this embedded microprocessor.
MPC885CVR66 Features
32-Bit Structure
MPC885CVR66 Applications
There are a lot of NXP USA Inc. MPC885CVR66 Microprocessor applications.
- Virtual reality VR robots
- DCS control intelligent sensor
- Entertainment-radios, CD players, televisions
- Vacuum cleaners
- Safety field
- Smartphones-calling, video calling, texting, email
- Computers and laptops-video calling, email, blogging
- Walkie talkies
- Removable disks
- Fax machines
