MPC885VR80
| Parameters | |
|---|---|
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (3), 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM, Security; SEC |
| Security Features | Cryptography |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MPC885 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 80MHz |
MPC885VR80 Overview
Packed in 357-BBGA, the microprocessor is convenient for shipping overseas. High reliability can be achieved by using the advanced packaging method Tray. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. Be aware of the operating temperature around 0°C~95°C TA. In the series MPC8xx, it is found. This CPU uses DRAM RAM controllers. This microprocessor is equipped with an interface of HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART. The CPU runs I/O at 3.3V. The type MICROPROCESSOR, RISC belongs to uPs/uCs/Peripheral ICs. To find variants of the microprocessor, try searching with MPC885. Total terminations are 357. Using a 1.8V voltage supply, you should be able to operate the cpu microprocessor. There is a 32-Bit architecture in it. A maximum supply current of 1.9V can be achieved by the microprocessor. As a Microprocessors, this cpu microprocessor is typical. An external data bus width of 32 is available on this CPU. This CPU microprocessor requires 1.83.3V power supplies according to the datasheet.
MPC885VR80 Features
32-Bit Structure
MPC885VR80 Applications
There are a lot of NXP USA Inc. MPC885VR80 Microprocessor applications.
- Keyboards
- Microwave ovens
- Oil and gas
- Air fryers
- Computed Tomography (CT scan)
- Pacemakers (used to control abnormal heart rhythm)
- Measurement and control field
- Electronic jamming systems
- Xbox
- Fire detection & safety devices
