MPC885ZP66
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC885 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 66MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (3), 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM, Security; SEC |
| Security Features | Cryptography |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | Non-RoHS Compliant |
MPC885ZP66 Overview
Packed in 357-BBGA, the microprocessor is convenient for shipping overseas. High reliability can be achieved by using the advanced packaging method Tray. CPUs have 1 Core 32-Bit cores/bus width. Understand how the operating temperature around 0°C~95°C TA is determined. This is part of the MPC8xx series. The CPU contains DRAM RAM controllers. The microprocessor features interfaces HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART for better service. I/O is run at 3.3V on this CPU. It is a MICROPROCESSOR, RISC in terms of uPs/uCs/Peripheral ICs. Try searching for variants of the cpu microprocessor with MPC885. A total of 357 terminations have been recorded. In the case of a 1.8V voltage supply, the embedded microprocessor should be turned on and run. There are 32 bits in its architecture. There is a maximum supply current of 1.9V in this microprocessor. An example of a Microprocessors embedded microprocessor. With a 32 external data bus width, this CPU has a wide data bus. According to datasheets, the micro processor requires 1.83.3V power sources.
MPC885ZP66 Features
32-Bit Structure
MPC885ZP66 Applications
There are a lot of NXP USA Inc. MPC885ZP66 Microprocessor applications.
- Oil and gas
- Current meter
- Magnetic resonance imaging (MRI)
- Automatic control
- Nintendo
- Entertainment-radios, CD players, televisions
- Removable disks
- Set-top boxes
- Teletext terminals
- Glucose monitoring systems (for Type 1 Diabetes)
