MPC885ZP80
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | MPC8xx |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC885 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 80MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (3), 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM, Security; SEC |
| Security Features | Cryptography |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | Non-RoHS Compliant |
MPC885ZP80 Overview
With a packing size of 357-BBGA, this embedded microprocessor is ideal for international shipping. The packaging method Tray provides high reliability. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. The operating temperature around 0°C~95°C TA should be understood. In the MPC8xx series, it is found. There are DRAM RAM controllers used by this CPU. Microprocessors with HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART interfaces are designed to serve users better. This CPU runs I/O at 3.3V. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. Using MPC885 will help you find variants of the cpu microprocessor. The total number of terminations is 357. A 1.8V voltage supply should be used to turn on and run the cpu microprocessor. There is a 32-Bit architecture in it. The maximum supply current is 1.9V. Microprocessors is a typical embedded microprocessor. This CPU has a wide external data Bus width of 32. In the datasheet, 1.83.3V power supplies are required for this embedded microprocessor.
MPC885ZP80 Features
32-Bit Structure
MPC885ZP80 Applications
There are a lot of NXP USA Inc. MPC885ZP80 Microprocessor applications.
- Calculator
- Gas monitoring systems
- Equipment control
- Computed Tomography (CT scan)
- Removable disks
- Hand-held metering systems
- Medical instruments
- Entertainment-radios, CD players, televisions
- Digital TVs
- Smartphone
