MPY100SG
| Parameters | |
|---|---|
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Packaging | Tube |
| Series | MPY |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | GOLD |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-CDIP-T14 |
| Function | Analog Multiplier/Divider |
| Qualification Status | COMMERCIAL |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 20V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 8.5V |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Bandwidth | 0.55MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Neg Supply Voltage-Min (Vsup) | -8.5V |
| Positive Input Voltage-Max | 10V |
| Negative Input Voltage-Max | -10V |
| Number of Bits/Stages | 4-Quadrant |
| Height Seated (Max) | 4.45mm |
| Length | 18.545mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MPY100SG Overview
Tube are used for its packaging.This module is embedded within the 14-CDIP (0.300, 7.62mm) package in order to provide cost-effectiveness.In most cases, there are 4-Quadrant bits per stage.Powered by a voltage of 15V, it operates on a DC supply.In this case, the supply voltage is nominally negative and referred to as -15V.An RF signal modulated at 0.55MHz occupies the frequency range of 0.55MHz.In order to prevent signals from reflecting off the other end of the transmission line, there are 14 terminations.Depending on the component with the lowest tolerance for high temperatures, NOT SPECIFIED will determine the reflow temperature limit.It is analog IC type ANALOG MULTIPLIER OR DIVIDER.In this case, the maximum operating temperature is 125°C.In normal operation, the maximum supply voltage is maintained at 20V.Keeping the operating temperature below -55°C is the maximum permissible.It is a well-known part of the MPY series, which is used in a wide variety of applications.
MPY100SG Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 0.55MHz
MPY100SG Applications
There are a lot of Rochester Electronics, LLC MPY100SG Analog Multipliers & Dividers applications.
- Digital cameras
- Test and measurement instruments
- Video and image computer boards
- Signal amplification
- PDA
- Medical imaging
- Thermocouples
- Multiplication and division circuits
- Voltage regulation circuit
- Tablets
