MSC8126MP8000
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | FCBGA |
| Number of Pins | 431 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 431 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead/Silver (Sn/Pb/Ag) |
| Max Operating Temperature | 90°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 500MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 431 |
| Power Supplies | 1.23.3V |
| Interface | Ethernet, RS-232 |
| Max Supply Voltage | 3.465V |
| Min Supply Voltage | 1.16V |
| RAM Size | 1.4MB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Bit Size | 16 |
| Frequency (Max) | 500MHz |
| Data Bus Width | 16b |
| Halogen Free | Halogen Free |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Format | FIXED POINT |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Height Seated (Max) | 3.3mm |
| Length | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
MSC8126MP8000 Overview
In the FCBGA package, it is a type of electronic component.Its uses have 431 terminations.Using 1.2V as the supply voltage, it operates.Pins are located on the 431 component.In its configuration, there are 431 pins.The device operates at the frequency of 500MHz in accordance with a specific design.Mounting is accomplished using Surface Mount.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.In order to power this device, a voltage as low as 1.16V needs to be supplied.There is a maximum voltage supply of 3.465V to this device.A 1.23.3V electric power source is used to power it.This system uses DIGITAL SIGNAL PROCESSOR, OTHER as its uPs, uCs, and peripheral ICs.The operating temperature should be lower than 90°C.A temperature exceeding 0°C is recommended for operation.Its frequency should not exceed 500MHz.
MSC8126MP8000 Features
Supplied in the FCBGA package
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
MSC8126MP8000 Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MSC8126MP8000 DSP applications.
- Scene analysis technology
- Finite impulse response digital filters
- Seismology
- Airplanes
- Digital hardware
- Sonar
- Instrument modeling
- Automobile electronic gadgets
- Seismology
- Other sensor array processing
