MSL1064AW
| Parameters | |
|---|---|
| fmax-Min | 1 MHz |
| Dimming | Analog, PWM |
| Number of Segments | 72 |
| Voltage - Supply (Max) | 36V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.286W |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1.1MHz |
| Base Part Number | MSL1064 |
| Number of Outputs | 6 |
| Power Supplies | 12V |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 2.286W |
| Max Supply Current | 30mA |
| Voltage - Output | 48V |
| Topology | Step-Up (Boost) |
| Internal Switch(s) | Yes |
MSL1064AW Overview
There is a 24-WQFN Exposed Pad package on the board that is used to save space. LED drivers are designed with 6 outputs.The mounting method adopted is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is possible for the led driver ic to operate normally at -40°C~85°C TA.A number of benefits are available to Backlight.1.1MHz is the frequency in which it operates.A termination of 24 is used to operate the LED driver.This configuration is built upon 24 pins.There are 72 segments in it.It is mounted in the way of Surface Mount.It's under the MSL1064 base part number.It is acceptable to supply voltages of 6.5V volts.The output voltage of this device is 48V.An optimized supply voltage of 36V is provided.Additionally, it is categorized into Display Drivers according to its characteristics.A minimum supply voltage of 4.75V is required to meet the highest efficiency standards.This device is able to provide high efficiency when the maximal supply current should be less than 30mA.
MSL1064AW Features
Available in the 24-WQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.1MHz
Supply voltage of 12V
MSL1064AW Applications
There are a lot of Microchip Technology MSL1064AW LED Driver ICs applications.
- Sports Facility Lighting
- LED headlights
- Other Electronic Devices
- Panel lighting
- LED Lighting PFCs, Linear Dimmable
- Down lighting
- Stage and Studio lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lightings for Inspection Devices
- Dimmable LED for vehicle interiors
