MSL2160DQ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | Adaptive SourcePower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight, Lighting |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.1W |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | MSL2160 |
| Number of Outputs | 16 |
| Power Supplies | 12V |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 10.8V |
| Nominal Supply Current | 70A |
| Power Dissipation | 2.1W |
| Max Supply Current | 30mA |
| Internal Switch(s) | No |
| fmax-Min | 20 MHz |
| Dimming | PWM |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 10.8V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.9mm |
| Length | 9mm |
| Width | 9mm |
| RoHS Status | ROHS3 Compliant |
MSL2160DQ Overview
Board space is saved by its 64-VFQFN Exposed Pad package.LED drivers designed using this technology use 16 outputs.The led driver mounting is done by using Surface Mount.In this case, it emerges as a Linear with a high efficiency.If the led driver ic is set to -40°C~105°C TA, it will work normally.The benefits of Backlight, Lighting are considerable.In this case, the frequency is 20MHz.For its operation, 64 terminations are designed.With a base of 64, this LED light driver is configured.In the absence of a voltage supply of at least 10.8V, undetermined failures may occur.A total of 16 segments are estimated.On the Surface Mount, a device is mounted.The LED driver is available under the part number MSL2160.The supply voltage of 13.2V is an acceptable maximum value.Further, it can be classified as Display Drivers based on its characteristics.This system is designed to operate at a minimum voltage of 10.8V to achieve maximum efficiency.If the maximum supply current is less than 30mA, the device is capable of providing high efficiency.LED drivers belonging to the series Adaptive SourcePower? are important components in a wide range of applications.
MSL2160DQ Features
Available in the 64-VFQFN Exposed Pad package
Operating temperature of -40°C~105°C TA
Frequency of 20MHz
Supply voltage of 12V
MSL2160DQ Applications
There are a lot of Microchip Technology MSL2160DQ LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Panel lighting
- Down lights
- Down lighting
- Constant Voltage Power Source for portable equipment
- LED backlight driver for LCD displays for portable equipment
- Stage Lighting and Signage
- Amusement Machines
- Portable lighting
- A- lamps
