MSL3163BT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | Adaptive SourcePower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.963W |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | MSL3163 |
| Number of Outputs | 16 |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 35mA |
| Power Dissipation | 2.963W |
| Max Supply Current | 100mA |
| Internal Switch(s) | Yes |
| fmax-Min | 1 MHz |
| Dimming | PWM |
| Number of Segments | 2560 |
| Voltage - Supply (Max) | 5.5V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MSL3163BT Overview
There is a 40-WFQFN Exposed Pad package on the board that is used to save space. As part of the design of this LED driver, there are 16 outputs that have been used.We are using Surface Mount as the mounting method.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Backlight provides many benefits.The frequency of 20MHz is used as the basis for its operation.The operation of this system is supported by 40 terminations.In this LED driver, the base is configured as 40.The number of segments is estimated to be 2560.There is a device mounted on the Surface Mount.A base part number of MSL3163 is associated with this LED driver.It is acceptable to operate with a supply voltage of 5.5V.Supply voltage can be set to a maximum value of 5.5V.Further, it can be classified as Display Drivers based on its characteristics.The maximum efficiency can be achieved by operating it at a minimal voltage of 4.75V.It is capable of delivering high efficiency when the maximal supply current is below 100mA.An LED driver belonging to the Adaptive SourcePower? series is an essential component in a wide range of applications.
MSL3163BT Features
Available in the 40-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
MSL3163BT Applications
There are a lot of Microchip Technology MSL3163BT LED Driver ICs applications.
- Down lights
- Replacement lamps
- Gallery lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Industrial LED Lighting: Image Recognition Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED backlight driver for LCD displays for portable equipment
- Scanners and Handy Terminals
- Amusement Machines
- Sports Facility Lighting
