MSP430F122IRHBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.206235mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | MSP430x1xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.2V |
| Frequency | 8MHz |
| Pin Count | 32 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 22 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MSP430 |
| Peripherals | POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 4KB 4K x 8 + 256B |
| Connectivity | SPI, UART/USART |
| Supply Current-Max | 0.35mA |
| Bit Size | 16 |
| Data Converter | Slope A/D |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| ROM (words) | 4096 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of Programmable I/O | 22 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 0.25 |
| Number of UART Channels | 1 |
| RAM (bytes) | 256 |
| Number of Serial I/Os | 1 |
| Number of Timers | 1 |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F122IRHBR Overview
For the purpose of saving space, it is available in the 32-VFQFN Exposed Pad package. Using Surface Mount, it is mounted. This item can be found in package Cut Tape (CT). With a processor of MSP430 cores, the device is powered. Working at -40°C~85°C TA temperature is recommended. The type of memory in which this program is stored is FLASH. 22 I/Os are present on the device. The terminals of this device are set to QUAD. This circuit consists of 32 terminationals. The electrical component is part of the series MSP430x1xx. As a result of the 2.2V supply voltage, high efficiency is possible. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 32 pins are used in its construction. A total of 32 pins are attached to it. In the device, there is a memory capacity of 4kB which may be used to store programs and data. 0.35mA is the maximum supply current. The system is highly efficient when working at a frequency of 8MHz. There are a total of 22 programmable I/Os available. An oscillator type Internal is required for it to work.
MSP430F122IRHBR Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
MSP430F122IRHBR Applications
There are a lot of Texas Instruments MSP430F122IRHBR Microcontroller applications.
- Missile control
- Binding machines
- Guidance-GPS
- Routers
- Smoke alarms
- Glucose monitoring systems (for Type 1 Diabetes)
- Digital TVs
- Calculators
- Gas monitoring systems
- Fire alarms
