MSP430F149IPM
| Parameters | |
|---|---|
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| Address Bus Width | 16b |
| Density | 480 kb |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 8 |
| Number of Programmable I/O | 48 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 2 |
| Number of Serial I/Os | 2 |
| Height | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 342.689036mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MSP430x1xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 8MHz |
| Pin Count | 64 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | SPI, UART, USART |
| Memory Size | 60kB |
| Oscillator Type | Internal |
| Number of I/O | 48 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 12 |
| Core Processor | MSP430 |
| Peripherals | POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 60KB 60K x 8 + 256B |
| Connectivity | SPI, UART/USART |
| Supply Current-Max | 0.56mA |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
MSP430F149IPM Overview
Packaged in a 64-LQFP format. The MCU has 48 I/O ports. The Mounting Type of the Microcontroller is Surface Mount. A 16-Bit core is used in order to power the IC chip. The type of its program memory is FLASH. The Microcontroller runs in -40°C~85°C TA Operating Temperature. Microcontroller runs in MSP430x1xx Series. This program memory has a size of 60KB 60K x 8 + 256B, which indicates what the size of the program memory is. Powered by a MSP430 Core processor. Microcontroller's a MICROCONTROLLER, RISC uPs/uCs/Peripheral IC. IC Chip 64 has 64 terminations. 16-bits are the size of the data that comes with MCU. A 3V volt supply is provided by the Microcontroller chip. The system has NO channels for DMA communication. 60kB is the size of the memory in the IC part. An effective performance can be achieved at a frequency of 8MHz. There are YES PWM channels on the device. It is possible to access the 64 pins on the chip through the 64 pins. A total of 2 timers/counters are included in the package. Microcontroller consists of 64 pins. It programs in 48 Programmable I/O. There is a set of 8 A/D converters on the device. The bits of the part is 12. A total of 2 serial I/Os are incorporated into this part.
MSP430F149IPM Features
MSP430x1xx series
64 Terminals
Based on the 16-Bit
Comes with 64 Pins
MSP430F149IPM Applications
There are a lot of Texas Instruments MSP430F149IPM Microcontroller applications. MSP430F149IPM MCU is usually applied for Measurement and control field, Consumer electronics products, Network communication, mobile communication, Office automation equipment and computer peripherals, Industrial control Instrumentation and process control, Agriculture, transportation, Navigation control, Network application, Metering & measurement, Day to day life, Safety, Medical instruments and Automobile industry.
Robotic prosthetic limbs
Communication
Gas monitoring systems
Virtual reality VR robots
Petrochemical
CD players
Electrocardiogram (EKG)
Set-top boxes
Vacuum cleaners
Firewalls
