Parameters | |
---|---|
Low Power Mode | YES |
Number of A/D Converters | 8 |
Format | FIXED-POINT |
Integrated Cache | NO |
RAM (words) | 10 |
Number of UART Channels | 2 |
Number of Serial I/Os | 2 |
Number of Timers | 6 |
Number of I2C Channels | 1 |
Height | 900μm |
Length | 9mm |
Width | 9mm |
Thickness | 880μm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
Contact Plating | Tin |
Mounting Type | Surface Mount |
Package / Case | 64-VFQFN Exposed Pad |
Surface Mount | YES |
Number of Pins | 64 |
Weight | 206.29948mg |
Operating Temperature | -40°C~85°C TA |
Packaging | Tape & Reel (TR) |
Series | MSP430x1xx |
JESD-609 Code | e3 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 64 |
ECCN Code | EAR99 |
Subcategory | Microcontrollers |
Technology | CMOS |
Terminal Position | QUAD |
Peak Reflow Temperature (Cel) | 260 |
Supply Voltage | 2.2V |
Terminal Pitch | 0.5mm |
Frequency | 8MHz |
Pin Count | 64 |
Operating Supply Voltage | 3.3V |
Supply Voltage-Max (Vsup) | 3.6V |
Interface | I2C, SCI, SPI, UART, USART |
Memory Size | 48kB |
Oscillator Type | Internal |
Number of I/O | 48 |
RAM Size | 10K x 8 |
Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
Number of Bits | 12 |
Core Processor | MSP430 |
Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
Program Memory Type | FLASH |
Core Size | 16-Bit |
Program Memory Size | 48KB 48K x 8 + 256B |
Connectivity | I2C, SPI, UART/USART |
Supply Current-Max | 0.6mA |
Bit Size | 16 |
Data Converter | A/D 8x12b; D/A 2x12b |
Watchdog Timer | Yes |
Access Time | 8 μs |
Has ADC | YES |
DMA Channels | YES |
Data Bus Width | 16b |
PWM Channels | YES |
DAC Channels | YES |
Boundary Scan | YES |
The package is in 64-VFQFN Exposed Pad format. The board has 48 I/Os. Surface Mount is the mounting type of the Microcontroller that is attached to the panel. As the name implies, this Microcontroller is based on the 16-Bit core. The type of its program memory is FLASH. The temperature range of this Microcontroller is within the range of -40°C~85°C TA. Microcontroller runs in MSP430x1xx Series. The electronic part has a program memory size of 48KB 48K x 8 + 256B. With a MSP430 Core Processor, Microcontroller is fast and efficient. The device belongs to MICROCONTROLLER, RISC uPs/uCs/Peripheral ICs Type. There are 64 terminations on the IC chip, which means there are 64 terminations on the integrated circuit chip. This part works in a 16-bit manner. There is an output of 2.2V volts from the Microcontroller chip. A total of YES DMA channels are available on MCU chip. The part owns 48kB memory size. At a frequency of 8MHz, Microcontroller can operate efficiently. It is possible for the device to work with the motor using the PWM channel YES. The chip has 64 pins. MCU chip counts 64 pins. As far as UART channels are concerned, it has 2. There are a total of 8 A/D converters on the device. A chip with 12 bits has 12 bits in total. The part has been designed to incorporate 1 I2C channels. There are 2 serial I/Os incorporated into the chip part. 6 bits are found on a MCU chip.
MSP430x1xx series
1 I2C channels
64 Terminals
Based on the 16-Bit
Comes with 64 Pins
There are a lot of Texas Instruments MSP430F1611IRTDT Microcontroller applications. MSP430F1611IRTDT MCU is usually applied for Measurement and control field, Consumer electronics products, Network communication, mobile communication, Office automation equipment and computer peripherals, Industrial control Instrumentation and process control, Agriculture, transportation, Navigation control, Network application, Metering & measurement, Day to day life, Safety, Medical instruments and Automobile industry.
Traditional industrial transformation
Mobile computers
Ipod
Dryers
ECG machine
Wastewater treatment
Electronic jamming systems
X-ray
PDAs, game consoles
Glucose monitoring systems