MSP430F2002IN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Weight | 925.810377mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | MSP430F2xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.2V |
| Terminal Pitch | 2.54mm |
| Frequency | 16MHz |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Interface | I2C, SPI |
| Memory Size | 1kB |
| Oscillator Type | Internal |
| Number of I/O | 10 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 1KB 1K x 8 + 256B |
| Connectivity | I2C, SPI |
| Bit Size | 16 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 16 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 8 |
| Number of Programmable I/O | 10 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (bytes) | 128 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F2002IN Overview
Due to the benefits of saving space, it is available in the 14-DIP (0.300, 7.62mm) package. It is mounted using the way of Through Hole. It comes in the package?of a Tube. A core processor of MSP430 is present in the device. Maintain a temperature of -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. There are 10 I/Os on the board. This device has terminals at DUAL. As far as terminations are concerned, there are 14 terminations present. An electrical component such as this is included in the series MSP430F2xx. High efficiency is possible due to the 2.2V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A number of 14 pins are used to construct it. It has a total of 14 pins on it. In Microcontrollers, this component is included. In order to store data and programs, the devices have a memory size of 1kB. Power comes from a source of 2/3.3V. It is highly efficient when it works at a frequency of 16MHz. There are 1 timers/counters. A chip with 10 programmable inputs/outputs is available. Internal is the oscillator type it uses.
MSP430F2002IN Features
14-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
MSP430F2002IN Applications
There are a lot of Texas Instruments MSP430F2002IN Microcontroller applications.
- DCS control intelligent sensor
- Smoke alarms
- Projectors
- Vacuum cleaners
- Keyboards
- Binding machines
- Hard drives
- Calculators
- Set-top boxes
- Embedded gateways
