MSP430F2013IN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Weight | 925.810377mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | MSP430F2xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.2V |
| Frequency | 16MHz |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI |
| Memory Size | 2kB |
| Oscillator Type | Internal |
| Number of I/O | 10 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 2KB 2K x 8 + 256B |
| Connectivity | I2C, SPI |
| Bit Size | 16 |
| Data Converter | A/D 10x16b |
| Watchdog Timer | Yes |
| Access Time | 16 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 4 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (bytes) | 128 |
| Number of PWM Channels | 2 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F2013IN Overview
Packaged in a 14-DIP (0.300, 7.62mm) format. The MCU has 10 I/O ports. The Mounting Type of the Microcontroller is Through Hole. The 16-Bit core is the core of the MCU. The type of memory it uses for its program is FLASH. The temperature range that this Microcontroller operates at is -40°C~85°C TA. MSP430F2xx-series components are electrical components. In the case of this Microcontroller, the memory size of the program is 2KB 2K x 8 + 256B. A MSP430 Core processor is used to power the device. The device belongs to MICROCONTROLLER, RISC uPs/uCs/Peripheral ICs Type. During the manufacture of the IC chip, there is a number 14 of terminations. 16-bits are used for its size. IC Chip has 2.2V volt supply outputs. Currently, MCU chip has NO DMA channels. 2kB memory size belongs to the Chip part. In the case of 16MHz frequency operation, it can perform efficiently. In this chip, 14 pins can be accessed. Using the timer/counter system, it has 1 timers/counters. The pin count is 14. A total of 8 UART channels are available on it. A total of 4 A/D converters are included in this device. 2 PWM channels are used by the device.
MSP430F2013IN Features
MSP430F2xx series
14 Terminals
Based on the 16-Bit
Comes with 14 Pins
MSP430F2013IN Applications
There are a lot of Texas Instruments MSP430F2013IN Microcontroller applications. MSP430F2013IN MCU is usually applied for Measurement and control field, Consumer electronics products, Network communication, mobile communication, Office automation equipment and computer peripherals, Industrial control Instrumentation and process control, Agriculture, transportation, Navigation control, Network application, Metering & measurement, Day to day life, Safety, Medical instruments and Automobile industry.
Robots
Paper shredders
Radios
Plant factories
Air fryers
DVD\DV\MP3 players
Fabric
Smoke alarms
Digital cameras
Computed Tomography (CT scan)
