MSP430F2121IDGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | MSP430F2xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 16MHz |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 3.3V |
| Interface | UART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 4KB 4K x 8 + 256B |
| Bit Size | 16 |
| Data Converter | Slope A/D |
| Watchdog Timer | Yes |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of Programmable I/O | 16 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (bytes) | 256 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F2121IDGVR Overview
As a result, it is available in the 20-TFSOP (0.173, 4.40mm Width) package. A Surface Mount mounting method is used. A package of Tape & Reel (TR) contains it. It is equipped with a MSP430 core processor. Work should be done at -40°C~85°C TA. There is FLASH program memory in it. There are 16 I/Os on it. This device has terminals at DUAL. As far as terminations are concerned, there are 20 terminations present. In the MSP430F2xx series, this electrical component is found. By using a 3.3V voltage supply, high efficiency is possible. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 20 pins are used to construct it. 20 pins are on it in total. Microcontrollers contains this component. Data and programs can be stored on the devices with a memory size of 4kB. A 2/3.3V source is used for powering it. At a frequency of 16MHz, it exhibits excellent efficiency. It appears that there are 1 timers/counters in use. There are 16 programmable input/output ports on the chip. In order to maintain normal operation, Vsup must be above 3.3V. Using a Internal oscillator type, it works well.
MSP430F2121IDGVR Features
20-TFSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
MSP430F2121IDGVR Applications
There are a lot of Texas Instruments MSP430F2121IDGVR Microcontroller applications.
- Nintendo
- Fax machines
- Torpedo guidance
- Oscilloscopes
- Electrocardiogram (EKG)
- Food and beverage
- Instrument control
- Heart rate monitors
- Blenders
- Blood pressure monitors
