MSP430F2131IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | MSP430F2xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 16MHz |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 3.3V |
| Interface | UART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 8KB 8K x 8 + 256B |
| Bit Size | 16 |
| Data Converter | Slope A/D |
| Watchdog Timer | Yes |
| Access Time | 16 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of Programmable I/O | 16 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (bytes) | 256 |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F2131IPWR Overview
To save space, it is included in the 20-TSSOP (0.173, 4.40mm Width) package. Surface Mount is the way to mount it. Tape & Reel (TR) is the package that contains it. There is a MSP430 as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. 16 I/Os can be found on it. The terminals of this device are located at DUAL. As far as terminations are concerned, there are 20 terminations present. This electrical component is part of the MSP430F2xx series. Using the 3.3V supply voltage allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 20 pins are used in its construction. On it, there are 20 pins. Microcontrollers contains this component. It is possible to store programs and data on the devices, as they have a memory size of 8kB. A 2/3.3V power source powers it. Working at a frequency of 16MHz results in excellent efficiency. In total, there are 1 timers and counters. The number of programmable inputs and outputs is 16. Normally, the supply voltage (Vsup) should remain above 3.3V. Internal is the oscillator type it uses.
MSP430F2131IPWR Features
20-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
MSP430F2131IPWR Applications
There are a lot of Texas Instruments MSP430F2131IPWR Microcontroller applications.
- Entertainment-radios, CD players, televisions
- Smart highways (navigation, traffic control, information monitoring and car service)
- Wastewater treatment
- Computers and laptops-video calling, email, blogging
- Process control devices
- Equipment control
- Guidance-GPS
- Leakage current tester
- Accu-check
- Speed meter
