MSP430F2132TRHBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | MSP430F2xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 16MHz |
| Pin Count | 32 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3.3V |
| Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 8KB 8K x 8 + 256B |
| Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 8 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 0.5 |
| RAM (bytes) | 512 |
| Number of Serial I/Os | 1 |
| Number of I2C Channels | 1 |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F2132TRHBT Description
The MSP430F2132TRHBT is a 16-bit ultra-low-power Mixed-signal Microcontroller that includes a powerful 16-bit RISC MSP430 CPU, 16-bit registers, and constant generators to help with code efficiency. The architecture, in conjunction with five low-power modes, is designed to maximize battery life. The digitally controlled oscillator (DCO) allows for faster wake-up from low-power modes to active mode. Two 16-bit timers, a fast 10-bit A/D converter integrated reference and a data transfer controller (DTC), a comparator, built-in communication capability via the universal serial bus, and 24 general-purpose I/O pins are included in the device configurations. The maximum frequency of this device is 16MHz.
MSP430F2132TRHBT Features
Resonator clock
External digital clock source
External resistor
16-bit Timer0
A3 with 3 Capture/Compare registers
16-bit Timer1
A2 with 2 Capture/Compare registers
On-chip comparator for analogue signal compare function or slope ADC
10-bit 200ksps ADC with internal reference, sample-and-hold, auto scan and data transfer controller
Enhanced UART supporting auto-baud rate detection (LIN)
IrDA Encoder and decoder
Synchronous SPI
Brownout detector
Serial onboard programming
No external programming voltage needed
Programmable code protection by security fuse
Bootstrap loader
16-bit RISC architecture, 62.5ns instruction cycle time
Internal frequencies up to 16MHz with four calibrated frequencies to ±1%
Internal very-low-power low-frequency oscillator
32kHz Crystal
High-frequency (HF) crystal up to 16MHz
MSP430F2132TRHBT Applications
Aerospace
Defence
Military
Medical
Portable Devices
