MSP430F2410TPM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 342.689036mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Series | MSP430F2xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Pin Count | 64 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART |
| Memory Size | 56kB |
| Oscillator Type | Internal |
| Number of I/O | 48 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 56KB 56K x 8 + 256B |
| Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Density | 448 kb |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 8 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 4 |
| Number of UART Channels | 2 |
| Number of Serial I/Os | 4 |
| Number of Timers | 6 |
| Number of SPI Channels | 4 |
| Height | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F2410TPM Description
The MSP430F2410TPM is a 16-bit ultra-low-power Mixed-signal Microcontroller that includes a powerful 16-bit RISC MSP430 CPU, 16-bit registers, and constant generators to help with code efficiency. The architecture, in conjunction with five low-power modes, is designed to maximize battery life. The digitally controlled oscillator (DCO) allows for faster wake-up from low-power modes to active mode. Two 16-bit timers, a 12-bit A/D converter, a comparator, a hardware multiplier, four universal serial communication interface (USCI) modules, and 48 general-purpose I/O pins are included in the device configurations. The maximum frequency of this device is 16MHz.
MSP430F2410TPM Features
External digital clock source
External resistor
12-bit ADC with internal reference, sample-and-hold and auto scan feature
16-bit Timer
A with 3 Capture/Compare registers
16-bit Timer
B with 7 Capture/Compare registers
Enhanced UART supporting auto-baud rate detection
IrDA Encoder and decoder
Synchronous SPI
On-chip comparator
Supply voltage supervisor/monitor with programmable level detection
Brownout detector
Bootstrap loader
Serial onboard programming
No external programming voltage needed
Programmable code protection by security fuse
16-bit RISC architecture, 62.5ns instruction cycle time
Internal frequencies up to 16MHz with four calibrated frequencies to ±1%
Internal very-low-power low-frequency oscillator
32kHz Crystal
Resonator clock
MSP430F2410TPM Applications
Test & Measurement
Portable Devices
Aerospace
Defence
Military
