MSP430F417IPM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 342.689036mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MSP430x4xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 8MHz |
| Pin Count | 64 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | UART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 48 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 + 256B |
| Bit Size | 16 |
| Data Converter | Slope A/D |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 16b |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| Density | 256 kb |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 1 |
| Number of PWM Channels | 5 |
| Height | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F417IPM Descritpion
The MSP430F417IPM is from the MSP430 family of ultra-low-power microcontrollers which consists of several devices featuring different sets of peripherals targeted for various applications. It is a microcontroller configuration with one or two built-in 16-bit timers, a comparator, 96 LCD segment drive capability, and 48 I/O pins.
MSP430F417IPM Features
Low Supply-Voltage Range, 1.8 V to 3.6 V
Ultralow Power Consumption
Five Power-Saving Modes
Wake-Up From Standby Mode in Less Than 6 μs
Frequency-Locked Loop (FLL+)
16-Bit RISC Architecture, 125-ns Instruction Cycle Time
16-Bit Timer_A With Three or Five? Capture/Compare Registers
Integrated LCD Driver for 96 Segments
On-Chip Comparator
Brownout Detector
Supply Voltage Supervisor/Monitor ?Programmable Level Detection on MSP430F415/417 Devices Only
Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
Bootstrap Loader in Flash Devices
Available in 64-Pin QFP (PM) and 64-Pin QFN (RTD/RGC) Packages
MSP430F417IPM Applications
Portable devices
Sensor systems
Industrial Applications
