MSP430F436IPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Weight | 677.610302mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MSP430x4xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 8MHz |
| Pin Count | 100 |
| Interface | SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 48 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 24K x 8 + 256B |
| Connectivity | SPI, UART/USART |
| Supply Current-Max | 0.56mA |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 16b |
| DAC Channels | NO |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 8 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 1 |
| Number of UART Channels | 1 |
| Number of Serial I/Os | 2 |
| Number of Timers | 7 |
| Number of PWM Channels | 3 |
| Number of SPI Channels | 2 |
| Height | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F436IPZ Overview
A space-saving advantage is that it is included in the 100-LQFP package. It is mounted using the way of Surface Mount. In the package Tray, it is included. The device runs in MSP430 core processor. Work should be done at -40°C~85°C TA. FLASH is its program memory type. 48 I/Os have been provided by the device. The terminals of this device are set to QUAD. As far as terminations are concerned, there are 100 terminations present. An electrical component such as this is included in the series MSP430x4xx. Because the supply voltage is 3V, high efficiency can be achieved. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. It is constructed with 100 pins. A total of 100 pins are attached to it. In the subcategory of Microcontrollers, this component is included. The devices have a maximum memory size of 24kB that can be used to store programs and data. 0.56mA is the maximum supply current. Using a frequency of 8MHz, it is very efficient. An oscillator of type Internal is used.
MSP430F436IPZ Features
100-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
MSP430F436IPZ Applications
There are a lot of Texas Instruments MSP430F436IPZ Microcontroller applications.
- Instrument control
- Robotic prosthetic limbs
- Smart instruments
- PDAs, game consoles
- Smart highways (navigation, traffic control, information monitoring and car service)
- Television
- Robots
- Electronic jamming systems
- Digital cameras
- Medical instruments chromatographs
