MSP430F5310IPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MSP430F5xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 8 MHZ |
| Subcategory | Microcontrollers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 25MHz |
| Base Part Number | MSP430 |
| Pin Count | 48 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 31 |
| RAM Size | 6K x 8 |
| Memory Type | FLASH, FRAM |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | CPUXV2 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
| Supply Current-Max | 6.5mA |
| Bit Size | 16 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 12 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 6 |
| Number of Serial I/Os | 4 |
| Number of Timers | 18 |
| Number of I2C Channels | 2 |
| Number of GPIO | 47 |
| Number of SPI Channels | 4 |
| Height | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F5310IPT Overview
In a 48-LQFP package, the MCU is available. The MCU has 31 I/O ports. In the case of the IC chip, the type of mounting is Surface Mount. 16-Bit core is the basis for this Microcontroller. The type of its program memory is FLASH. Temperatures within -40°C~85°C TA range are measured by this Microcontroller. MSP430F5xx series components make up this electrical component. 32KB 32K x 8 is the size of its program memory. The CPUXV2 Core Processor powers the device and is one of its key features. This device falls under the MICROCONTROLLER, RISC uPs/uCs/Peripheral ICs category. There are 48 terminations on the IC chip, which means there are 48 terminations on the integrated circuit chip. 16-bits are the size of the data that comes with MCU. IC Chip has 3V volt supply outputs. With YES DMA channels, Microcontroller chip can handle large data transfers. 32kB memory size belongs to the part. Alternatives can be found by looking at the base part number MSP430 Microcontroller. MCU's frequency is 25MHz. The device works in YES PWM channels. It is possible to access the 48 pins on the chip through the 48 pins. The pins counted are 48. It has built-in FLASH, FRAM memory. I would like to mention a few additional features such as ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 8 MHZ in order to name a few. The device contains 12 A/D converters. 2 I2C channels are integrated by the part. A total of 4 serial I/Os are included in the electronic part. There are 18 bits in total on an IC chip.
MSP430F5310IPT Features
MSP430F5xx series
Base part number of MSP430
The memory type of FLASH, FRAM
Additional features of ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 8 MHZ
2 I2C channels
48 Terminals
Based on the 16-Bit
Comes with 48 Pins
MSP430F5310IPT Applications
There are a lot of Texas Instruments MSP430F5310IPT Microcontroller applications. MSP430F5310IPT MCU is usually applied for Measurement and control field, Consumer electronics products, Network communication, mobile communication, Office automation equipment and computer peripherals, Industrial control Instrumentation and process control, Agriculture, transportation, Navigation control, Network application, Metering & measurement, Day to day life, Safety, Medical instruments and Automobile industry.
Fax machines
Microwave ovens
Blenders
Computed Tomography (CT scan)
Broadband technology
Information appliances
Smartphones
Magnetic resonance imaging (MRI)
Hand-held metering systems
Industrial robot
