Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
Contact Plating | Gold |
Mounting Type | Surface Mount |
Package / Case | 64-VFQFN Exposed Pad |
Surface Mount | YES |
Number of Pins | 64 |
Operating Temperature | -40°C~85°C TA |
Packaging | Tape & Reel (TR) |
Series | MSP430F5xx |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 64 |
ECCN Code | EAR99 |
Additional Feature | IT ALSO OPERATES IN 1.8V MIN SUPPLY AT 8MHZ |
Subcategory | Microcontrollers |
Technology | CMOS |
Terminal Position | QUAD |
Peak Reflow Temperature (Cel) | 260 |
Supply Voltage | 3.3V |
Terminal Pitch | 0.5mm |
Frequency | 25MHz |
Base Part Number | MSP430 |
Pin Count | 64 |
Supply Voltage-Max (Vsup) | 3.6V |
Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART |
Memory Size | 64kB |
Oscillator Type | Internal |
Number of I/O | 47 |
RAM Size | 6K x 8 |
Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
Core Processor | CPUXV2 |
Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
Program Memory Type | FLASH |
Core Size | 16-Bit |
Program Memory Size | 64KB 64K x 8 |
Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
Supply Current-Max | 11mA |
Bit Size | 16 |
Data Converter | A/D 12x12b |
Watchdog Timer | Yes |
Has ADC | YES |
DMA Channels | YES |
Data Bus Width | 16b |
PWM Channels | YES |
DAC Channels | NO |
Number of Timers/Counters | 4 |
ROM (words) | 65536 |
Boundary Scan | YES |
Low Power Mode | YES |
Number of A/D Converters | 16 |
Format | FIXED-POINT |
RAM (words) | 6 |
Number of UART Channels | 2 |
Number of Serial I/Os | 2 |
Number of GPIO | 48 |
Height | 1mm |
Length | 9mm |
Width | 9mm |
Thickness | 880μm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The MSP430F5324IRGCR is a 16-bit ultra-low-power Mixed-signal Microcontroller that includes a powerful 16-bit RISC MSP430 CPU, 16-bit registers, and constant generators to help with code efficiency. The architecture, in conjunction with five low-power modes, is designed to maximize battery life. Wake-up time from low-power modes to active mode is less than 3.5s thanks to the digitally controlled oscillator (DCO) (typical). It has four 16-bit timers, a 12-bit A/D converter, three internal DMA channels, an 8-channel comparator, two universal serial communication interfaces (USCI), and a 32-bit hardware multiplier, and 47 general-purpose I/O pins. The maximum frequency of this device is 25MHz.
Low-frequency trimmed internal reference source (REFO)
32kHz Watch crystals (XT1)
High-frequency crystals up to 32MHz (XT2)
16-bit Timer TA0, Timer
A with five Capture/Compare registers
16-bit Timer TA1, Timer
A with three Capture/Compare registers
16-bit Timer TA2, Timer
A with three Capture/Compare registers
16-bit Timer TB0, Timer
B with seven Capture/Compare shadow registers
Enhanced UART supports auto-baud rate detection
IrDA Encoder and decoder
Synchronous SPI
10-bit ADC with internal reference, sample-and-hold and auto scan feature
Serial onboard programming
No external programming voltage needed
Basic timer with RTC
290μA/MHz Active mode (AM) power consumption
16-bit RISC architecture, extended memory, up to 25MHz system clock
Fully integrated LDO with programmable regulated core supply voltage
Supply voltage supervision, monitoring and brownout
FLL Control loop for frequency stabilization
Low-power low-frequency internal clock source (VLO)
Portable Devices
Test & Measurement
Sensing & Instrumentation