MSP430F5342IRGZR
| Parameters | |
|---|---|
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 9 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 10 |
| Number of UART Channels | 2 |
| Number of Serial I/Os | 2 |
| Number of GPIO | 31 |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| Series | MSP430F5xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Additional Feature | IT ALSO OPERATES IN 1.8V MIN SUPPLY AT 8MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 25MHz |
| Base Part Number | MSP430 |
| Pin Count | 48 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, SCI, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 10K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | CPUXV2 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, IrDA, SCI, SPI, UART/USART |
| Supply Current-Max | 11mA |
| Bit Size | 16 |
| Data Converter | A/D 9x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
MSP430F5342IRGZR Description
The MSP430F5342IRGZR ultra-low-power microcontroller is made up of numerous devices with distinct peripheral sets designed for different purposes. The architecture is optimized for extended battery life in portable measurement applications, thanks to a variety of low-power modes. The MSP430F5342IRGZR microcontroller is equipped with a strong 16-bit RISC CPU, 16-bit registers, and a constant generator for optimal code efficiency. The MSP430F5342IRGZR microcontroller can wake up from low-power modes to active mode in 3.5 seconds thanks to the digitally controlled oscillator (DCO) (typical).
Four 16-bit timers, a high-performance 12-bit ADC, two USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 38 I/O pins are included in the MSP430F5342IRGZR MCU variants.
MSP430F5342IRGZR Features
Low Supply-Voltage Range:
3.6 V Down to 1.8 V
Ultra-Low Power Consumption
Active Mode (AM): All System Clocks Active
290 μA/MHz at 8 MHz, 3 V, Flash Program Execution (Typical)
150 μA/MHz at 8 MHz, 3 V, RAM Program Execution (Typical)
Standby Mode (LPM3):
Real-Time Clock (RTC) With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.9 μA at 2.2 V, 2.1 μA at 3 V (Typical)
Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.4 μA at 3 V (Typical)
Off Mode (LPM4):
Full RAM Retention, Supply Supervisor Operational, Fast Wakeup: 1.1 μA at 3 V (Typical)
Shutdown Mode (LPM4.5): 0.18 μA at 3 V (Typical)
MSP430F5342IRGZR Applications
Consumer Electronics
Buildings & Home Automation systems
Factory Control & Automation Applications
Grid Infrastructure & Metering networks
Portable Test & Measurement Equipment
Health, Medical & Fitness Applications
Analog Sensor Systems
Digital Sensor Systems
Data Loggers
General-Purpose Applications
The MSP430F5342IRGZR ultra-low-power microcontroller is made up of numerous devices with distinct peripheral sets designed for different purposes. The architecture is optimized for extended battery life in portable measurement applications, thanks to a variety of low-power modes. The MSP430F5342IRGZR microcontroller is equipped with a strong 16-bit RISC CPU, 16-bit registers, and a constant generator for optimal code efficiency. The MSP430F5342IRGZR microcontroller can wake up from low-power modes to active mode in 3.5 seconds thanks to the digitally controlled oscillator (DCO) (typical).
Four 16-bit timers, a high-performance 12-bit ADC, two USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 38 I/O pins are included in the MSP430F5342IRGZR MCU variants.
MSP430F5342IRGZR Features
Low Supply-Voltage Range:
3.6 V Down to 1.8 V
Ultra-Low Power Consumption
Active Mode (AM): All System Clocks Active
290 μA/MHz at 8 MHz, 3 V, Flash Program Execution (Typical)
150 μA/MHz at 8 MHz, 3 V, RAM Program Execution (Typical)
Standby Mode (LPM3):
Real-Time Clock (RTC) With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.9 μA at 2.2 V, 2.1 μA at 3 V (Typical)
Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.4 μA at 3 V (Typical)
Off Mode (LPM4):
Full RAM Retention, Supply Supervisor Operational, Fast Wakeup: 1.1 μA at 3 V (Typical)
Shutdown Mode (LPM4.5): 0.18 μA at 3 V (Typical)
MSP430F5342IRGZR Applications
Consumer Electronics
Buildings & Home Automation systems
Factory Control & Automation Applications
Grid Infrastructure & Metering networks
Portable Test & Measurement Equipment
Health, Medical & Fitness Applications
Analog Sensor Systems
Digital Sensor Systems
Data Loggers
General-Purpose Applications
