MSP430F5630IPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MSP430F5xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | OPERATES AT 1.8V SUPPLY AT 8MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | MSP430 |
| Pin Count | 100 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 74 |
| RAM Size | 18K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | CPUXV2 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART, USB |
| Bit Size | 16 |
| Watchdog Timer | Yes |
| Has ADC | NO |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 16 |
| Number of Programmable I/O | 74 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 16 |
| Number of UART Channels | 2 |
| Number of Serial I/Os | 4 |
| Height | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F5630IPZ Overview
There is an option to purchase it in the 100-LQFP package, which saves space. A Surface Mount mounting method is used. A package of Tray contains it. Device with CPUXV2 core processor issupported. During work, the temperature should remain at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. A total of 74 I/Os are available on this device. A comparable component can be found by using the base part number MSP430. The terminals of this device are located at QUAD. A 100 termination is contained within it. Part of the MSP430F5xx series, this electrical component is used in a variety of applications. By using a 3V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 100 pins are used to construct it. There are a total of 100 pins on it. In the subcategory of Microcontrollers, this component is included. The devices have a maximum memory size of 128kB that can be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. There are currently 4 timers/counters set up on the system. The number 74 represents the number of programmable I/O ports on the board. Moreover, it possesses the property of OPERATES AT 1.8V SUPPLY AT 8MHZ. Using a Internal oscillator type, it works well.
MSP430F5630IPZ Features
100-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
MSP430F5630IPZ Applications
There are a lot of Texas Instruments MSP430F5630IPZ Microcontroller applications.
- Leakage current tester
- Medical instruments chromatographs
- Tape drives
- Removable disks
- Industrial instrumentation devices
- Walkie talkies
- Copiers
- Switches
- Smoke alarms
- Kindle
