MSP430F6638IPZR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | MSP430F6xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 8 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | MSP430 |
| Pin Count | 100 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 74 |
| RAM Size | 18K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | CPUXV2 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART, USB |
| Bit Size | 16 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| Boundary Scan | YES |
| Number of A/D Converters | 16 |
| Number of Programmable I/O | 74 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 16 |
| Number of UART Channels | 2 |
| Number of Serial I/Os | 1 |
| Height | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F6638IPZR Description
The MSP430F6638IPZR is a 16-bit ultra-low-power Mixed-signal Microcontroller that has a strong 16-bit RISC MSP430 CPU, 16-bit registers, and constant generators to help with code efficiency. The architecture, in conjunction with five low-power modes, is designed to maximize battery life. The digitally controlled oscillator (DCO) enables the rapid transition from low-power to active modes in less than 3s (typical). Four 16-bit timers, a 12-bit A/D converter, two universal serial communication interfaces (USCIs), a six-channel internal DMA, a 12-channel comparator, a 32-bit hardware multiplier, and 74 general-purpose I/O pins are included in the MSP430F6638IPZR configuration. The MSP430F6638IPZR has a maximum operating frequency of 20MHz and a low supply voltage range of 1.8 to 3.6V.
MSP430F6638IPZR Features
16-bit RISC architecture, extended memory, up to 20MHz system clock
Fully integrated LDO with programmable regulated core supply voltage
Supply voltage supervision, monitoring and brownout
FLL Control loop for frequency stabilization
Low-power low-frequency internal clock source (VLO)
Low-frequency trimmed internal reference source (REFO)
32kHz Crystals (XT1)
High-frequency crystals up to 32MHz (XT2)
Four 16-bit timers with 3, 5 or 7 Capture/Compare registers
Enhanced UART supports auto-baud rate detection
IrDA Encoder and decoder
Synchronous SPI
Full-speed USB - integrated USB-PHY, 3.3V and 1.8V USB power system, USB-PLL, 8 I/O endpoints
12-bit ADC with internal shared reference, sample-and-hold and auto-scan feature
Dual 12-bit DAC with synchronization
Voltage comparator
Integrated liquid crystal display (LCD) driver with contrast control for up to 160 segments
Serial onboard programming
No external programming voltage needed
RTC module with supply voltage backup switch
MSP430F6638IPZR Applications
Portable Devices
Test & Measurement
Sensing & Instrumentation
Motor Drive & Control
Consumer Electronics
Metering
Clock & Timing
