MSP430FR5720IRGER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | MSP430™ FRAM |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 8MHz |
| Base Part Number | MSP430 |
| Pin Count | 24 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 1K x 8 |
| Memory Type | FLASH, FRAM, ROMless |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | CPUXV2 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FRAM |
| Core Size | 16-Bit |
| Program Memory Size | 4KB 4K x 8 |
| Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
| Supply Current-Max | 2.8mA |
| Bit Size | 16 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 10 |
| Number of Programmable I/O | 17 |
| Format | FIXED-POINT |
| RAM (words) | 1 |
| Number of UART Channels | 1 |
| Number of Serial I/Os | 2 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430FR5720IRGER Overview
There is a 24-VFQFN Exposed Pad package available to save space. Mounted using Surface Mount. Package Cut Tape (CT) contains it. The device has a CPUXV2 core processor. It is important to keep the temperature at -40°C~85°C TA while working. FRAM has been assigned to it as a program memory. The device has 17 I/Os. It has a base part number of MSP430 that can be used to find other components that are comparable. The terminals of this device are located at QUAD. It consists of 24 terminationals. MSP430? FRAM is the series number of this electrical component. Using the 3V supply voltage allows for high efficiency. As a storage type for data, FLASH, FRAM, ROMless is used. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A total of 24 pins are used in its construction. On it, there are 24 pins. In the subcategory of Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 4kB. It is important to note that the maximum supply current is 2.8mA. The system is highly efficient when working at a frequency of 8MHz. In total, there are 3 timers and counters. There are 17 programmable I/Os in the device. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2V. It works with an oscillator type Internal.
MSP430FR5720IRGER Features
24-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
MSP430FR5720IRGER Applications
There are a lot of Texas Instruments MSP430FR5720IRGER Microcontroller applications.
- Robots
- Instrument control
- Graphic terminals
- Digital cameras
- Copiers
- Computer/laptop
- Binding machines
- Paper shredders
- Firewalls
- Wastewater treatment
