MSP430FR5723IRHAT
| Parameters | |
|---|---|
| Package / Case | 40-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | MSP430™ FRAM |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 8MHz |
| Base Part Number | MSP430 |
| Pin Count | 40 |
| Operating Supply Voltage | 3.6V |
| Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 1K x 8 |
| Memory Type | FRAM, ROMless |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | CPUXV2 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FRAM |
| Core Size | 16-Bit |
| Program Memory Size | 8KB 8K x 8 |
| Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
| Bit Size | 16 |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED-POINT |
| RAM (words) | 1 |
| Number of UART Channels | 2 |
| Number of Serial I/Os | 2 |
| Number of GPIO | 33 |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
MSP430FR5723IRHAT Overview
Due to the benefits of saving space, it is available in the 40-VFQFN Exposed Pad package. A Surface Mount mounting method is used. It is available in the Cut Tape (CT) package. The device runs in CPUXV2 core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FRAM has been assigned to it as a program memory. A total of 32 I/Os are present. It has a base part number of MSP430 that can be used to find other components that are comparable. This device has terminals at QUAD. Currently, it consists of 40 terminationals. The electrical component is part of the series MSP430? FRAM. Because the supply voltage is 3V, high efficiency can be achieved. As far as data storage is concerned, FRAM, ROMless is used as the memory type. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 40 pins are used to construct it. In total, it has 40 pins. It belongs to the subcategory Microcontrollers. Using the devices' 8kB memory size, you can store programs and data. It is highly efficient when it works at a frequency of 8MHz. Designers can fully utilize the supply voltage of 3.6V's adaptability while employing it. 5 timer/counters are present. An oscillator type Internal is required for it to work.
MSP430FR5723IRHAT Features
40-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
MSP430FR5723IRHAT Applications
There are a lot of Texas Instruments MSP430FR5723IRHAT Microcontroller applications.
- Process control devices
- Home appliances
- Entertainment products
- Answering machines
- Heart rate monitors
- Toys
- Dialysis machines (performs function of liver)
- Aerospace navigation systems
- Tape drives
- Hand-held metering systems
