MSP430FR5728IRGET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | MSP430™ FRAM |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 8MHz |
| Base Part Number | MSP430 |
| Pin Count | 24 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 1K x 8 |
| Memory Type | FLASH, FRAM, ROMless |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | CPUXV2 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FRAM |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 10 |
| Format | FIXED-POINT |
| RAM (words) | 1 |
| Number of Serial I/Os | 2 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430FR5728IRGET Overview
As a result, it is available in the 24-VFQFN Exposed Pad package. The way of Surface Mount is used to mount it. It comes in a Tape & Reel (TR) package. The device has a CPUXV2 core processor. During work, the temperature should remain at -40°C~85°C TA. Its type of program memory is FRAM. There are 17 I/Os on the board. A component with the same part number as MSP430 can be compared to other similar components. The terminals of this device are set to QUAD. There are a total of 24 terminations in it. The MSP430? FRAM series contains this electrical component. High efficiency is possible due to the 3V supply voltage. As a storage type for data, FLASH, FRAM, ROMless is used. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. 24 pins are used to construct it. 24 pins are on it in total. In the subcategory of Microcontrollers, this component is included. In order to store data and programs, the devices have a memory size of 16kB. It is highly efficient when it works at a frequency of 8MHz. A total of 3 timers/counters have been set up. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2V. It works with an oscillator type Internal.
MSP430FR5728IRGET Features
24-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
MSP430FR5728IRGET Applications
There are a lot of Texas Instruments MSP430FR5728IRGET Microcontroller applications.
- Medical instruments chromatographs
- Hand-held metering systems
- Fabric
- Information appliances (networking of household appliances)
- Computed Tomography (CT scan)
- Smart instruments
- Glucose monitoring systems (for Type 1 Diabetes)
- Fire detection & safety devices
- Process control devices
- Robotic prosthetic limbs
