MSP430G2203IPW20
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | MSP430G2xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.2V |
| Terminal Pitch | 0.65mm |
| Frequency | 16MHz |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART |
| Memory Size | 2kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 2KB 2K x 8 |
| Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
| Bit Size | 16 |
| Watchdog Timer | Yes |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (bytes) | 256 |
| Number of Serial I/Os | 2 |
| Number of Timers | 6 |
| Number of I2C Channels | 1 |
| Number of GPIO | 24 |
| Number of SPI Channels | 2 |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430G2203IPW20 Description
The TI MSP line of ultra-low-power microcontrollers consists of a number of components with varied peripherals aimed at different applications. In portable measurement applications, the architecture is tailored to achieve longer battery life through the use of five low-power modes. The system includes a potent 16-bit RISC CPU, 16-bit registers, and constant generators that help the code run as efficiently as possible. The device may transition from low-power modes to active modes in less than 1 μs thanks to the digitally controlled oscillator (DCO).
The MSP430G2203IPW20 device is a mixed-signal ultra-low-power microcontroller that includes built-in 16-bit timers, up to 24 I/O capacitive-touch enabled pins, and built-in USCI communication functionality.
Low-cost sensor systems that record analog signals, transform them into digital values, and then process the data for display or transmission to a host system are typical uses.
MSP430G2203IPW20 Features
Universal Serial Communication Interface (USCI)
– Enhanced UART Supports Automatic BaudRate Detection (LIN)
– IrDA Encoder and Decoder
– Synchronous SPI
– I2C
10-Bit 200-ksps Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and Autoscan
Brownout Detector
Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
On-Chip Emulation Logic With Spy-Bi-Wire Interface
Section 3 Summarizes Available Family Members
Package Options
– TSSOP: 20 Pin, 28 Pin
– PDIP: 20 Pin
– QFN: 32 Pin
Low Supply-Voltage Range: 1.8 V to 3.6 V
Ultra-Low Power Consumption
– Active Mode: 230 μA at 1 MHz, 2.2 V
– Standby Mode: 0.5 μA
– Off Mode (RAM Retention): 0.1 μA
Five Power-Saving Modes
Ultra-Fast Wake up From Standby Mode in Less Than 1 μs
16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time
Basic Clock Module Configurations
– Internal Frequencies up to 16 MHz With Four Calibrated Frequencies
– Internal Very-Low-Power Low-Frequency (LF) Oscillator
– 32-kHz Crystal
– External Digital Clock Source
Two 16-Bit Timer_A With Three Capture/Compare Registers
Up to 24 Capacitive-Touch Enabled I/O Pins
MSP430G2203IPW20 Applications
Power Management
Sensor Interface
Automobile engine control systems
Implantable medical devices
Remote controls
Office machines
Appliances
