Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
Contact Plating | Gold |
Mounting Type | Surface Mount |
Package / Case | 32-VFQFN Exposed Pad |
Surface Mount | YES |
Number of Pins | 32 |
Operating Temperature | -40°C~85°C TA |
Packaging | Tape & Reel (TR) |
Series | MSP430G2xx |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 2 (1 Year) |
Number of Terminations | 32 |
Subcategory | Microcontrollers |
Technology | CMOS |
Terminal Position | QUAD |
Peak Reflow Temperature (Cel) | 260 |
Frequency | 16MHz |
Pin Count | 32 |
Supply Voltage-Max (Vsup) | 3.6V |
Supply Voltage-Min (Vsup) | 3.3V |
Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART |
Memory Size | 16kB |
Oscillator Type | Internal |
Number of I/O | 24 |
RAM Size | 512 x 8 |
Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
Core Processor | MSP430 |
Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
Program Memory Type | FLASH |
Core Size | 16-Bit |
Program Memory Size | 16KB 16K x 8 |
Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
Bit Size | 16 |
Data Converter | A/D 8x10b |
Watchdog Timer | Yes |
Has ADC | YES |
DMA Channels | YES |
Data Bus Width | 16b |
PWM Channels | YES |
DAC Channels | NO |
Number of Timers/Counters | 2 |
Boundary Scan | YES |
Low Power Mode | YES |
Number of A/D Converters | 8 |
Format | FIXED-POINT |
Integrated Cache | NO |
RAM (words) | 0.5 |
RAM (bytes) | 512 |
Number of Serial I/Os | 1 |
Number of I2C Channels | 1 |
Height | 1mm |
Length | 5mm |
Width | 5mm |
Thickness | 900μm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The MSP430G2553IRHB32T is a 16-bit ultra-low-power Mixed-signal Microcontroller that includes a strong 16-bit RISC MSP430 CPU, 16-bit registers, and constant generators to help with code efficiency. The architecture, in conjunction with five low-power modes, is designed to maximize battery life. The digitally controlled oscillator (DCO) provides for faster wake-up from low-power settings to active mode. The MSP430G2553IRHB32T features two 16-bit clocks, a 10-bit A/D converter, a flexible analogue comparator, built-in connectivity through the universal serial bus, and 24 general-purpose I/O pins. The maximum frequency of this gadget is 16MHz.
Two 16-bit Timer
A with 3 Capture/Compare registers
Up to 24 Capacitive-touch enabled I/O pins
Enhanced UART supporting auto baud rate detection (LIN)
IrDA Encoder and decoder
Synchronous SPI
On-chip comparator for analogue signal compare function or slope ADC
10-bit 200ksps ADC with internal reference, sample-and-hold and auto-scan
Brownout detector
Serial onboard programming
No external programming voltage needed
Programmable code protection by security fuse
On-chip emulation logic with spy-bi-wire interface
230μA at 1MHz, 2.2V Active mode (AM) power consumption
16-bit RISC architecture, 62.5ns instruction cycle time
Internal frequencies up to 16MHz with four calibrated frequencies
Internal very-low-power low-frequency oscillator
32kHz Crystal
External digital clock source
Portable Devices
Test & Measurement
Sensing & Instrumentation