MTAPD-07-015
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-LCC |
| Operating Temperature | -20°C~85°C |
| Packaging | Strip |
| Published | 2014 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 5A (24 Hours) |
| Diode Type | Avalanche |
| Response Time | 600ps |
| Voltage - DC Reverse (Vr) (Max) | 200V |
| Max Reverse Voltage (DC) | 200V |
| Wavelength | 905nm |
| Dark Current | 400pA |
| Spectral Range | 400nm ~ 1100nm |
| Active Area | 0.2mm2 |
| Responsivity @ nm | 55 A/W @ 905nm |
| RoHS Status | RoHS Compliant |
MTAPD-07-015 Overview
Strip is used to protect the photodiodes from damage. In order to ensure their safety, the photodiodes are packaged into 6-LCC packages. As long as the photodiodes are operated continuously in reverse-bias mode, the maximum voltage they can tolerate is 200V. Under reverse-bias mode, the voltage of the photodiodes should not exceed 200V. It is possible for a photodiode to operate at 400pA current even if no light is provided.
MTAPD-07-015 Features
Moisture Sensitivity Level (MSL): 5A (24 Hours)
Operating Temperature: -20°C~85°C
Packaging: Strip
Diode Type: Avalanche
Mount: Surface Mount
Spectral Range: 400nm ~ 1100nm
Response Time: 600ps
Responsivity @ nm: 55 A/W @ 905nm
MTAPD-07-015 Applications
There are a lot of Marktech Optoelectronics MTAPD-07-015 Photodiodes applications.
- Low Cost Light Monitoring
- Machine Controls
- Heart Rate Monitoring
- High speed photo detector
- Emitter Alignment
- Position sensing
- LiDAR
- Photo interrupters
- Shaft encoders
- Solar Cells
