MTS2916A-LGC1
| Parameters | |
|---|---|
| Height Seated (Max) | 2.642mm |
| Length | 15.697mm |
| Width | 7.518mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-BFSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MTS2916A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 30V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 800μA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 1mA |
| Voltage - Load | 10V~40V |
| Screening Level | TS 16949 |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
MTS2916A-LGC1 Overview
Drivers controllers is designed with Tape & Reel (TR) package.This part is packaged with a case of [0].A mounting position of Surface Mountis recommended for the part.For the component connected to [0], it is suitable.There is a possibility of providing 4.5V~5.5Vvolts through the device.There is a temperature range of -40°C~150°C TJin which this device operates.Drivers controllers is possible to categorize the motor type as Brushed DC.This part offers 24terminations.The voltage can applied to the load at the rate of 10V~40V.Drivers controllers is recommended that this amplifier be run at 5V.Its recommended mounting way is Surface Mount.Maintain the current output of the part at 750mA volts.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.As a result of the MTS2916Apart number, it can be found.Drivers controllers is designed wDrivers controllersh 24 pins.The Motion Control Electronicsseries includes this item.A supply voltage of 30V is required for the operation of this driver.
MTS2916A-LGC1 Features
Applications : General Purpose
Load voltage across the chip 10V~40V
base on MTS2916A number
MTS2916A-LGC1 Applications
There are a lot of Microchip Technology MTS2916A-LGC1 motor drivers applications.
- Architectural lighting
- Scanning equipment
- Matrix LED dimmers
- CHMSL (center high-mount stop lamps)
- Charge pump circuits
- General lighting
- Indicator
- Lighting for health and wellbeing
- Hazardous application
- Display LED backlighting
