MTS62C19A-HS105
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-BFSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | Automotive |
| Additional Feature | ALSO REQUIRED LOAD SUPPLY VOLTAGE OF 10V TO 40V |
| Subcategory | Motion Control Electronics |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MTS62C19A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 40V |
| Operating Supply Voltage | 30V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 800μA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 550mA |
| Supply Current-Max (Isup) | 1mA |
| Max Collector Current | 750mA |
| Voltage - Load | 10V~40V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8 |
| Height | 2.642mm |
| Length | 15.85mm |
| Width | 7.595mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MTS62C19A-HS105 Overview
Drivers controllers is designed with Tube package.A 24-BFSOP (0.295, 7.50mm Width)case is included with the part.In general, it is recommended that the part be mounted by Surface Mount.In this case, it is appropriate for the component connected to Automotive.Drivers controllers is capable of supplying 4.5V~5.5V volts.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.A motor of this type can be categorized as Brushed DC.This part offers 24terminations.The voltage can applied to the load at the rate of 10V~40V.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.The output current should be kept at 550mA for the part.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.This can be determined by looking at the MTS62C19A part number.A device with 24pins is available.Drivers controllers belongs to the series [0].A supply voltage of 30V is required for the operation of this driver.At [0], the output voltage is maintained.Also, ALSO REQUIRED LOAD SUPPLY VOLTAGE OF 10V TO 40Vcan be found as a characteristic of this type.Currently, there are 2 channels available.
MTS62C19A-HS105 Features
Applications : Automotive
Load voltage across the chip 10V~40V
base on MTS62C19A number
Additional Feature: ALSO REQUIRED LOAD SUPPLY VOLTAGE OF 10V TO 40V
MTS62C19A-HS105 Applications
There are a lot of Microchip Technology MTS62C19A-HS105 motor drivers applications.
- Street lights
- Digital still cameras
- Large format LED backlighting
- RGB and monochromatic LED drivers for signage and traffic signals
- Human-centric lighting
- General lighting
- Hospitality buildings
- parking lights
- Hazardous application
- Automotive applications
