MTS62C19A-LS105
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | Automotive |
| Additional Feature | ALSO REQUIRED LOAD SUPPLY VOLTAGE OF 10V TO 40V |
| Subcategory | Motion Control Electronics |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MTS62C19A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Operating Supply Voltage | 30V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 750mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 550mA |
| Supply Current-Max (Isup) | 1mA |
| Voltage - Load | 10V~40V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8 |
| Length | 15.697mm |
| Width | 7.518mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MTS62C19A-LS105 Overview
There is a Tape & Reel (TR)package included in the design.This part is packed in a 24-SOIC (0.295, 7.50mm Width) case.The part should be mounted by Surface Mount.I believe it would be suitable for the component connected to Automotive.In this case, the device can supply 4.5V~5.5V volts.This device operates at a temperature range of -40°C~150°C TJ.A motor of this type can be categorized as Brushed DC.There are 24 terminations available on this part.If the voltage is applied to the load at the rate of [0], the load will be affected.This amplifier should be operated at 5V.The recommended mounting method is Surface Mount.Maintain a current of 550mAfor the part output.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.According to the MTS62C19Apart number, the part is found.24pins are present on the device.This is part of the Motion Control Electronics series.The available outputs are [0].Drivers controllers operates from a voltage of 30V volts.A characteristic ALSO REQUIRED LOAD SUPPLY VOLTAGE OF 10V TO 40Vis also associated with it.
MTS62C19A-LS105 Features
Applications : Automotive
Load voltage across the chip 10V~40V
base on MTS62C19A number
designed with 2 outputs
Additional Feature: ALSO REQUIRED LOAD SUPPLY VOLTAGE OF 10V TO 40V
MTS62C19A-LS105 Applications
There are a lot of Microchip Technology MTS62C19A-LS105 motor drivers applications.
- Home lighting systems
- A cross between entertainment
- Side marker lights
- Tunnel lights
- Infotainment backlighting
- Large format LED backlighting
- Running preventive- maintenance diagnostics
- Industrial high-bay lights
- Dome
- Indicator circuit
