MUX08AQ/883C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Multiplexer or Switches |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MUX08 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 12mA |
| Power Dissipation | 247mW |
| Propagation Delay | 2.1 μs |
| Turn On Delay Time | 2 μs |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 300Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 7pF |
| On-state Resistance Match-Nom | 21Ohm |
| Switch Time (Ton, Toff) (Max) | 2μs, 400ns |
| Channel-to-Channel Matching (ΔRon) | 21 Ω (Typ) |
| Crosstalk | -70dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.025A |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MUX08AQ/883C Overview
Due to its 16-CDIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Through Hole. Multiplexer and demultiplexer circuits have a number 8:1. An extended operating temperature of -55°C~125°C degrees Celsius. Total terminations are 16. A electrical component with 8 channels is capable of high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There is an electrical component included in the 16 series. The circuits in this analogue multiplexer number 1. MUX08 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 300Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. In order to operate this switch device, it would need a current of 12mA. Despite this switch's dual supply capability, its voltage should not exceed 18V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. A 8 input needs to be operated.
MUX08AQ/883C Features
8 Channels
12mA Supply Current
MUX08AQ/883C Applications
There are a lot of Analog Devices Inc. MUX08AQ/883C Analog Switches & Multiplexers ICs applications.
- Medical Instrumentation
- Automotive applications
- Battery Powered Systems
- Imaging
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Avionics
- High speed data transmission line cards
- Communications systems
- Fiber In The Loop (FITL)
- Channelized and Unchannelized DS3 applications
