MUX08EP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | JFET |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MUX08 |
| Output | COMMON OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 247mW |
| Throw Configuration | DPST |
| Propagation Delay | 1.5 μs |
| Turn On Delay Time | 2 μs |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 2 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 300Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 7pF |
| On-state Resistance Match-Nom | 40Ohm |
| Switch Time (Ton, Toff) (Max) | 2μs, 400ns |
| Channel-to-Channel Matching (ΔRon) | 21 Ω |
| Crosstalk | -70dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 2000ns |
| Switch-off Time-Max | 400ns |
| Drain to Source Resistance | 400Ohm |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MUX08EP Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Through Hole. 8:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around 0°C~70°C TA are extended for operation. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A total of 1 circuits make up this switch device. Try searching with MUX08 to find analog multiplexer variants. An switch multiplexer with 300Ohm internal resistance has a value of 300Ohm. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Despite this switch's dual supply capability, its voltage should not exceed 18V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. COMMON OUTPUT outputs are utilized by this digital multiplexer. The electronic component can function from 15V. There is 400Ohm Drain to Source resistance on this electronic part.
MUX08EP Features
8 Channels
Drain-to-Source resistance: 400Ohm
MUX08EP Applications
There are a lot of Analog Devices Inc. MUX08EP Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Precision test equipment
- Industrial
- PBX interfaces
- Digital Cross-Connects
- Optical Applications
- Imaging
- Microwave transmission systems
- Communication systems
- Avionics
