MUX08EPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Max Power Dissipation | 500mW |
| Technology | JFET |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MUX08 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 247mW |
| Throw Configuration | DPST |
| Turn On Delay Time | 2 μs |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 300Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 7pF |
| On-state Resistance Match-Nom | 15.4Ohm |
| Switch Time (Ton, Toff) (Max) | 2μs, 400ns |
| Channel-to-Channel Matching (ΔRon) | 21 Ω |
| Crosstalk | -70dB @ 500kHz |
| Switch-on Time-Max | 2000ns |
| Switch-off Time-Max | 400ns |
| Drain to Source Resistance | 300Ohm |
| Height | 3.3mm |
| Length | 20.07mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
MUX08EPZ Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. The operating temperature is extended to around 0°C~70°C TA. The total number of terminations is 16. As a result of its 8 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. The circuits in this analogue multiplexer number 1. Use MUX08 to search for variants of the digital switches. Analog switches have 300Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. If put voltage greater than 18V on the multiplexer, damage may be caused to the device. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. A 8 input needs to be operated. Check out the electrical component's additional features, such as the following: OVERVOLTAGE PROTECTION. There is 300Ohm resistance between the Drain and Source on this part.
MUX08EPZ Features
8 Channels
Additional Features: OVERVOLTAGE PROTECTION
Drain-to-Source resistance: 300Ohm
MUX08EPZ Applications
There are a lot of Analog Devices Inc. MUX08EPZ Analog Switches & Multiplexers ICs applications.
- PBXs
- Audio and video signal routing
- Audio and video switching
- Digital access cross connects
- RGB switches
- Channelized and Unchannelized DS3 applications
- Relay Replacement
- Digital Cross-Connects
- SDH
- Public switching systems
