MUX08EQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | JFET |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MUX08 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 247mW |
| Throw Configuration | DPST |
| Propagation Delay | 1.5 μs |
| Turn On Delay Time | 2 μs |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 2 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 300Ohm |
| High Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 7pF |
| On-state Resistance Match-Nom | 15.4Ohm |
| Switch Time (Ton, Toff) (Max) | 2μs, 400ns |
| Channel-to-Channel Matching (ΔRon) | 21 Ω |
| Crosstalk | -70dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 2000ns |
| Switch-off Time-Max | 400ns |
| Signal Current-Max | 0.025A |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MUX08EQ Overview
As the electronic part is packed in 16-CDIP (0.300, 7.62mm), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Through Hole is this multiplexer. 8:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -25°C~85°C TA. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. Electronic part bodies are injected with 16 pins. Circuits number 1 make up this analogue multiplexer. MUX08 can be used to search for analog multiplexer variants. An switch multiplexer with 300Ohm internal resistance has a value of 300Ohm. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 18V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. A voltage of 15V can be used to operate the electronic component. Check out the electrical component's additional features, such as the following: OVERVOLTAGE PROTECTION.
MUX08EQ Features
8 Channels
Additional Features: OVERVOLTAGE PROTECTION
MUX08EQ Applications
There are a lot of Analog Devices Inc. MUX08EQ Analog Switches & Multiplexers ICs applications.
- Central office
- Avionics test equipment
- Relay Replacement
- Digital access cross connects
- Medical systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Industrial
- E1 Multiplexer
- Industrial control systems
- PCMCIA cards
