MUX08FPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Max Power Dissipation | 500mW |
| Technology | JFET |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MUX08 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 6mA |
| Power Dissipation | 247mW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 300Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 7pF |
| On-state Resistance Match-Nom | 27Ohm |
| Switch Time (Ton, Toff) (Max) | 2μs, 400ns |
| Channel-to-Channel Matching (ΔRon) | 21 Ω |
| Crosstalk | -70dB @ 500kHz |
| Switch-on Time-Max | 2000ns |
| Switch-off Time-Max | 400ns |
| Drain to Source Resistance | 400Ohm |
| Height | 3.3mm |
| Length | 20.07mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
MUX08FPZ Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have the same number of circuits 8:1. The operating temperature is extended to around -40°C~85°C TA. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. This electrical component is included in the 16 series of products. A 1 circuit is present in this switch device. Use MUX08 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 300Ohm. The datasheets for the 16 pins explain the functions. For this digital switch to work, 6mA current would suffice. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 18V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. Among the inputs that can be operated are the 8 inputs. This electrical component also includes additional features such as OVERVOLTAGE PROTECTION. There is 400Ohm resistance between the Drain and Source on this part.
MUX08FPZ Features
8 Channels
6mA Supply Current
Additional Features: OVERVOLTAGE PROTECTION
Drain-to-Source resistance: 400Ohm
MUX08FPZ Applications
There are a lot of Analog Devices Inc. MUX08FPZ Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Communications systems
- Modems
- Precision test equipment
- Channel Banks
- Microwave transmission systems
- FTTH
- RGB switches
- Medical systems
- CSU
