MUX08FQ
| Parameters | |
|---|---|
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Subcategory | Multiplexer or Switches |
| Technology | JFET |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MUX08 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 247mW |
| Throw Configuration | DPST |
| Propagation Delay | 1.5 μs |
| Turn On Delay Time | 2 μs |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 2 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 300Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 7pF |
| On-state Resistance Match-Nom | 27Ohm |
| Switch Time (Ton, Toff) (Max) | 2μs, 400ns |
| Channel-to-Channel Matching (ΔRon) | 21 Ω |
| Crosstalk | -70dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 2000ns |
| Switch-off Time-Max | 400ns |
| Signal Current-Max | 0.025A |
MUX08FQ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-CDIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 8:1. Temperatures around -25°C~85°C TA are extended for operation. In total, there have been 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 16 series that this electronic component is included. 1 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MUX08. In this multiplexer, the internal resistance is 400Ohm. Datasheets for functions of 16 pins are available. This switch device is a typical Multiplexer or Switches. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. The electronic component can function from 15V. Operating the 8 inputs requires 8 inputs. Additional features include: OVERVOLTAGE PROTECTION.
MUX08FQ Features
8 Channels
Additional Features: OVERVOLTAGE PROTECTION
MUX08FQ Applications
There are a lot of Analog Devices Inc. MUX08FQ Analog Switches & Multiplexers ICs applications.
- Avionics
- Communication systems
- USB 1.1 signal switching circuits
- PDAs
- ISDN NT1/TA
- MP3 players
- Industrial control systems
- Isolation
- Digital access cross connects
- SDH
