MUX08FS
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Technology | JFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MUX08 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 12mA |
| Power Dissipation | 247mW |
| Max Supply Current | 12mA |
| Throw Configuration | DPST |
| Propagation Delay | 2.1 μs |
| Turn On Delay Time | 2 μs |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 300Ohm |
| High Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 7pF |
| On-state Resistance Match-Nom | 27Ohm |
| Switch Time (Ton, Toff) (Max) | 2μs, 400ns |
| Channel-to-Channel Matching (ΔRon) | 21 Ω |
| Crosstalk | -70dB @ 500kHz |
| Switch-on Time-Max | 2000ns |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MUX08FS Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. It is part of the design of the 16 series that this electronic component is included. Circuits number 1 make up this analogue multiplexer. Use MUX08 to search for variants of the digital switches. As far as internal resistance is concerned, it has 400Ohm. For details about the functions of 16 pins, please refer to the datasheets. In order to operate this switch device, it would need a current of 12mA. A digital multiplexer may suffer damage if voltage is applied above 12mA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 18V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. The 8 inputs need to be operated in order to work. Additional features of the electronic component include: OVERVOLTAGE PROTECTION.
MUX08FS Features
8 Channels
12mA Supply Current
Additional Features: OVERVOLTAGE PROTECTION
MUX08FS Applications
There are a lot of Analog Devices Inc. MUX08FS Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- PBX interfaces
- Digital access cross connects
- Battery Powered Instruments
- Digital cross connects (DSX-1)
- Routers
- Voice over IP/DSL – Integrated Access Devices, Smart
- Low-Voltage
- Transmit
- PBXs
