MUX506IPW
| Parameters | |
|---|---|
| Normal Position | NC |
| Signal Current-Max | 0.03A |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MUX506 |
| Output | COMMON OUTPUT |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Input Voltage (Min) | -5V |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Bandwidth | 500MHz |
| Supply Current-Max (Isup) | 0.062mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 200Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 94 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 12.2pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Time (Ton, Toff) (Max) | 136ns, 78ns |
| Charge Injection | 0.31pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 97ns |
MUX506IPW Overview
The electronic part can be shipped overseas conveniently because it is packaged in 28-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 16:1. Operating temperature extended to -40°C~125°C TA. The total number of terminations is 28. This electronic part offers high-quality output due to its 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The circuits in this analogue multiplexer number 1. Try searching for the analog switch ic with MUX506 if you are looking for variants. You can find the functions of the 28 pins in the datasheets. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. There are COMMON OUTPUT outputs on this analog switch ic. 500MHz bandwidths enable data to be transferred.
MUX506IPW Features
1 Channels
Bandwidth: 500MHz
MUX506IPW Applications
There are a lot of Texas Instruments MUX506IPW Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Residential Gateways, Home Gateway/Router
- Channel Banks
- Low-Voltage
- FTTH
- Cellular phones
- Avionics and Military Systems
- Power routing
- Precision instrumentation
- Central office
