MUX507IDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MUX507 |
| Output | COMMON OUTPUT |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Input Voltage (Min) | -5V |
| Input Voltage (Max) | 18V |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Bandwidth | 500MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 200Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 88 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 7.5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Time (Ton, Toff) (Max) | 136ns, 78ns |
| Charge Injection | 0.67pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 151ns |
| Switch-off Time-Max | 97ns |
| Normal Position | NC |
| Signal Current-Max | 0.03A |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
MUX507IDWR Overview
The electronic component is convenient to ship overseas because it is packed in a 28-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 8:1. Around -40°C~125°C TA is the extended operating temperature. In total, 28 terminations have occurred. The electronic part provides high-quality output because it has 2 channels. A 15V voltage supply should turn on and run the electronic component. There are 2 circuits in this multiplexer. Try searching for the analog switch ic with MUX507 if you are looking for variants. To find out what the functions of 28 pins are, please refer to their datasheets. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. COMMON OUTPUT outputs are utilized by this digital multiplexer. In 500MHz-bandwidths, data can be transferred.
MUX507IDWR Features
2 Channels
Bandwidth: 500MHz
MUX507IDWR Applications
There are a lot of Texas Instruments MUX507IDWR Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Precision test equipment
- Voice over IP/DSL – Integrated Access Devices, Smart
- Channelized and Unchannelized DS3 applications
- Avionics test equipment
- ISDN NT1/TA
- Multiplexers
- Industrial control systems
- Battery-powered systems
- Residential Gateways, Home Gateway/Router
