MUX507IPWR
| Parameters | |
|---|---|
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.1pF 6.4pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Time (Ton, Toff) (Max) | 136ns, 78ns |
| Charge Injection | 0.31pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 151ns |
| Switch-off Time-Max | 97ns |
| Normal Position | NC |
| Signal Current-Max | 0.03A |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MUX507 |
| Output | COMMON OUTPUT |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Input Voltage (Min) | -5V |
| Input Voltage (Max) | 18V |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Bandwidth | 500MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 200Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 94 dB |
MUX507IPWR Overview
Shipping overseas is convenient due to the electrical component's packing in 28-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 28. Due to its 2 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. The circuits in this analogue multiplexer number 2. Try searching for the analog switch ic with MUX507 if you are looking for variants. You can find the functions of the 28 pins in the datasheets. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. A total of COMMON OUTPUT outputs are available on this analog switch ic. It is possible to transfer data over a 500MHz-bandwidth.
MUX507IPWR Features
2 Channels
Bandwidth: 500MHz
MUX507IPWR Applications
There are a lot of Texas Instruments MUX507IPWR Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Access Concentrators
- Cross Connects
- Avionics and Military Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Precision instrumentation
- HDTV
- Multi-Line E1 Interface Cards
- Audio and video routing
- Frame Relay Equipment
