MUX508IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 170Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MUX508 |
| Output | COMMON OUTPUT |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Input Voltage (Min) | -5V |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Bandwidth | 500MHz |
| Supply Current-Max (Isup) | 0.062mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 170Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.4pF 7.5pF |
| On-state Resistance Match-Nom | 2.4Ohm |
| Switch Time (Ton, Toff) (Max) | 136ns, 75ns |
| Charge Injection | 0.3pC |
| Channel-to-Channel Matching (ΔRon) | 2.4 Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 90ns |
| Normal Position | NC |
| Signal Current-Max | 0.03A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MUX508IDR Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. There are 16 terminations totally. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. 1 circuits are used in this analogue multiplexer. MUX508 can be used to search for analog multiplexer variants. An switch multiplexer with 170Ohm internal resistance has a value of 170Ohm. Datasheets for 16 pin functions are available upon request. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. A total of COMMON OUTPUT outputs are available on this analog switch ic. 500MHz bandwidths enable data to be transferred.
MUX508IDR Features
1 Channels
Bandwidth: 500MHz
MUX508IDR Applications
There are a lot of Texas Instruments MUX508IDR Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- Residential Gateways, Home Gateway/Router
- Low-Voltage
- Sample hold systems
- Fiber to the Home
- Sample-and-hold systems
- DSLAMs
- Relay Replacement
- E1 Multiplexer
- PBX interfaces
