MUX509IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 250Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MUX509 |
| Output | COMMON OUTPUT |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Input Voltage (Min) | -5V |
| Input Voltage (Max) | 18V |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Bandwidth | 500MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 170Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.4pF 4.3pF |
| On-state Resistance Match-Nom | 2.4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 136ns, 75ns |
| Charge Injection | 0.3pC |
| Channel-to-Channel Matching (ΔRon) | 2.4 Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 151ns |
| Switch-off Time-Max | 90ns |
| Drain to Source Resistance | 250Ohm |
| Normal Position | NC |
| Signal Current-Max | 0.03A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MUX509IPWR Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~125°C TA extended. In total, 16 terminations have occurred. As a result of its 2 channels, this electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. These analog multiplexers are built based on SP4T switching circuits. There are 2 circuits in this switch device. Try searching for MUX509 variants of the analog switch ic. Analog switches have 250Ohm internal resistance. Datasheets for functions of 16 pins are available. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. It is possible to use COMMON OUTPUT outputs on this digital multiplexer. 500MHz bandwidths enable data to be transferred. It has a Drain to Source resistance of 250Ohm ohms.
MUX509IPWR Features
2 Channels
Switch Circuit: SP4T
Bandwidth: 500MHz
Drain-to-Source resistance: 250Ohm
MUX509IPWR Applications
There are a lot of Texas Instruments MUX509IPWR Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Optical Applications
- Audio and video switching
- Switching Systems
- Precision data acquisition
- Frame Relay Equipment
- Audio and video routing
- Communications systems
- Avionics
- Medical
