MXL1016CS8-T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MXL1016 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | Complementary, TTL |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Output Current | 20mA |
| Propagation Delay | 14 ns |
| Quiescent Current | 35mA |
| Response Time | 10 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 69.54dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 10μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 96dB CMRR, 100dB PSRR |
| Propagation Delay (Max) | 14ns |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MXL1016CS8-T Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of Complementary, TTL .The part is shipped by Tape & Reel (TR) .8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical with Latch comparator.Electronic comparator has a total of 1 elements.The device is equipped with 8 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.You can find more pin-to-pin solutions for your special requirements by searching MXL1016 .This comparator presents a quiescent current of 35mA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.The device can be powered by 5/+-5V power supplies.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 69.54dB .
MXL1016CS8-T Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 35mA
Voltage Gain: 69.54dB
MXL1016CS8-T Applications
There are a lot of Maxim Integrated MXL1016CS8-T linear comparators applications.
- Consumer Medical Electronics
- Threshold Detectors
- General-Purpose, Low-Voltage Applications
- Metering Systems
- High-Speed Sampling Circuits
- Zero-Crossing Detectors
- Infotainment & cluster
- Hand-Held Electronics
- Body Control Modules
- Factory automation & control
