N74F109D,602
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F109 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 125MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 17mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| fmax-Min | 90 MHz |
| Max Frequency@Nom-Sup | 90000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
N74F109D,602 Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). It is contained within the Tubepackage. There is a Differentialoutput configured with it. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. 0°C~70°C TAis the operating temperature. JK Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74Fseries FPGA. A frequency of 125MHzshould not be exceeded by its output. A total of 2 elements are present. T flip flop consumes 17mA quiescent energy. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74F109, you will find similar parts. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as F/FAST. This part is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. An electrical current of 5V volts is applied to it.
N74F109D,602 Features
Tube package
74F series
5V power supplies
N74F109D,602 Applications
There are a lot of NXP USA Inc. N74F109D,602 Flip Flops applications.
- Computers
- Consumer
- Common Clocks
- Frequency Dividers
- Bus hold
- Dynamic threshold performance
- Synchronous counter
- Power down protection
- Digital electronics systems
- Reduced system switching noise
